Simulation of vertical centrifugal casting using ANSYS

Arpita *

Assistant Professor, Mechanical Engineering, Government Engineering College, Samastipur, Bihar, India.
 
Research Article
International Journal of Science and Research Archive, 2024, 11(01), 2290–2303.
Article DOI: 10.30574/ijsra.2024.11.1.0327
Publication history: 
Received on 11 January 2024; revised on 18 February 2024; accepted on 21 February 2024
 
Abstract: 
Axis-symmetric products are often made by means of centrifugal casting, which involves heating and transferring molten metal into a rapidly rotating mould. Centrifugal casting defects are mostly associated with the solidification process. However, when employing experimental techniques for centrifugal casting, determining the process of solidification pace and duration is quite challenging. Simulations may be used to analyze and optimize operational conditions.
 
Keywords: 
Vertical Centrifugal Casting; Casting Defects; Computational Fluid Dynamics; Volume of Fluid; Enthalpy-Porosity Model; Standard K-ε model
 
Full text article in PDF: 
 
Copyright information: 

Copyright © 2024 Author(s) retain the copyright of this article. This article is published under the terms of the Creative Commons Attribution Liscense 4.0