Fabrication of wire drawing machine

Nihal Kumar Dasoju *, Sai Sampath Chary Rameshwaram, Prashanth Gante, Ranadeer Nallapu, Sandeep Nelakurthi, Mahesh Kodisela and Gowlikar Vamshi Raj

Department of Mechanical Engineering, Vignan Institute of Technology and Science, Hyderabad, India.
 
Research Article
International Journal of Science and Research Archive, 2023, 09(02), 123–134.
Article DOI: 10.30574/ijsra.2023.9.2.0507
Publication history: 
Received on 26 April 2023; revised on 30 June 2023; accepted on 01 July 2023
 
Abstract: 
Wire drawing is a metal working process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing dies. There are many applications for wire drawing, including electrical wiring, cables, tension loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments. Although similar in process, drawing is different from extrusion, because in drawing the wire is pulled, rather than pushed, through the die. Drawing is usually performed at room temperature, thus classified as a cold working process, but it may be performed at elevated temperatures for large wires to reduce forces. The main objective of this project is to Fabrication of Wire Drawing Machine for reducing the silver and gold wire diameter. 
 
Keywords: 
Draw dies; Gears; Pulleys; Motors
 
Full text article in PDF: 
 
Copyright information: 

Copyright © 2023 Author(s) retain the copyright of this article. This article is published under the terms of the Creative Commons Attribution Liscense 4.0